RISK MANAGEMENT OF RICE SUPPLY CHAIN BASED ON RISK CORRELATION (Case Study: Penajam Paser Utara)

Aruni An Umila Ullya, Anggriani Profita, Farida Djumiati Sitania

Abstract

Rice is the staple food with a continuous increase of it’s demand. Therefore, it’s availability should be well-maintained. Rice farmers and millers don’t yet have an advantageous position. Other risks also has the potential to disrupt the rice production process. This study aims to analyze and create priority risk mitigation in the rice supply chain of PPU. The methods used in this research were ISM to create a risk structure, FMECA to assess risk, and AHP to mitigate priority risk. There were  41 risks, consist of 26 risks for farmers and 15 risks for millers. Based on FMECA result, the priority risk from farmers is poor quality rice seeds (RPN of 112 and a medium criticality level). The priority risk from millers is damage to the rice grinder machine (RPN of 490 and a very high criticality level). The mitigation strategies were prepared by considering the interrelationships between risks in the ISM. If totaled based on the results, there were 11 risks for farmers that could be overcome by the 6 alternative mitigation strategies that exist. As for the rice mill, there were 6 risks that could be overcome by the 4 alternative mitigation strategies that exist. All of these alternatives were calculated using the AHP method. The priority mitigation for the farmer's were routine monitoring and maintaining the moisture content of the seeds, while the priority mitigation for the millers were periodic maintenance scheduling and the provision of spare engine components.

 

Keywords

Risk; Supply Chain; ISM; FMECA; AHP

Full Text:

PDF

References

Badan Pusat Statistik. 2019. ‘Kajian Konsumsi Bahan Pokok tahun 2017’. [Daring]. Tersedia pada:

https://www.bps.go.id//publication/2019/06/25/bbf8ec1716fb4583687996c3/kajian-konsumsi-bahan-pokok-tahun-2017.html

Badan Pusat Statistik. 2020. ‘Proyeksi Penduduk Indonesia 2015-2045 Hasil SUPAS 2015’. [Daring]. Tersedia pada:

https://www.bps.go.id/publication/2018/10/19/78d24d9020026ad95c6b5965/proyeksi-penduduk-indonesia-2015-2045-hasil-supas-2015.html

Badan Pusat Statistik Kabupaten Penajam Paser Utara. 2020. ‘Luas Tanam, Panen, Puso Padi Sawah Menurut Kecamatan di Kabupaten Penajam Paser Utara (ha), 2019’. [Daring]. Tersedia pada:

https://ppukab.bps.go.id/statictable/2020/03/30/578/luas-tanam-panen-dan-puso-padi-sawah-menurut-kecamatan-di-kabupaten-penajam-paser-utara-ha-2019.html

Badan Pusat Statistik Kabupaten Penajam Paser Utara. 2020. ‘Produksi Komoditas Pangan Menurut Jenis Komoditas di Kabupaten Penajam Paser Utara (ton), 2019’. [Daring]. Tersedia pada:

https://ppukab.bps.go.id/statictable/2020/03/30/580/produksi-komoditas-

pangan-menurut-jenis-komoditas-di-kabupaten-penajam-paser-utara-ton-2019.html

Badan Pusat Statistik. 2021. ’Hasil Sensus Penduduk 2020’. [Daring]. Tersedia pada:

https://www.bps.go.id/pressrelease/2021/01/21/1854/hasil-sensus-penduduk-2020.html

Badan Pusat Statistik. 2021. ‘Karakteristik Rumah Tangga Menurut Status Kemiskinan 2020-2021’. [Daring]. Tersedia pada:

https://www.bps.go.id/indicator/23/207/1/karakteristik-rumah-tangga-menurut-status-kemisikinan.html

Badan Pusat Statistik. 2021. ‘Pertumbuhan Ekonomi Indonesia Triwulan II-2021’. [Daring]. Tersedia pada:

https://www.bps.go.id/pressrelease/2021/08/05/1813/ekonomi-indonesia-triwulan-ii-2021-tumbuh-7-07-persen--y-on-y-.html

Baihaqi, M. R., Rahayu, D. K. dan Profita, A. 2019. ‘Analisis Risiko Rantai Pasok Pertanian Berbasis Contract Farming di Kabupaten Paser’, Journal Industrial Servicess, 4(2), 82–88. doi: 10.36055/jiss.v4i2.5156.

Budiningsih, E. dan Jauhari, W. A. 2017. ‘Analisis Pengendalian Persediaan Spare Part Mesin Produksi di PT. Prima Sejati Sejahtera dengan Metode Continuous Review’, PERFORMA: Media Ilmiah Teknik Industri, 16(2), 152–160. doi: 10.20961/performa.16.2.16994.

Departemen Pertanian. 2007. Manual Fumigasi Fosfin (Untuk Perlakuan Karantina Tumbuhan). Jakarta.

Department of the Army, 2006, Failure Modes, Effect, and Criticality Analysis (FMECA), for Command, Control, Communications, Computer, Intellingence, Surveillance, and, Reconnaissance (C4ISR) Facilities, Washington DC.

Fathoni, M. Z. 2020. ‘Analisis Risiko pada Proyek Pembuatan Lintel Set Point dengan Metode Kualitatif (Studi Kasus : PT. XYZ)’, Jurnal PASTI, 14(2), 113-126. doi: 10.22441/pasti.2020.v14i2.002.

Indiati, S. W. dan Marwoto, M. 2017. ‘Penerapan Pengendalian Hama Terpadu (PHT) pada Tanaman Kedelai’, Buletin Palawija, 15(2), 87. doi: 10.21082/bulpa.v15n2.2017.p87-100.

Jaya, R., Ismail, M., Yusriana, Mirza, I., Mehran, Asis, Bakar, B. A. 2019. ‘Analisis dan Mitigasi Risiko Rantai Pasok Minyak Pala Kabupaten Aceh Selatan Menggunakan FMECA’. Jurnal Teknologi Industri Pertanian, 29(1), 79-87, ISSN: 0216-3160.

Maghfiroh, I. S. & Wibowo, R., 2019, Manajemen Risiko Rantai Pasok Tebu (Studi Kasus di PTPN X ), Jurnal Pangan, Vol. 28, No. 3.

Nasution, M., Bakhori, A., dan Novarika, W. 2021. ‘Manfaat Perlunya Manajamen Perawatan untuk Bengkel Industri’. Buletin Utama Teknik, Vol. 16, No. 3, e-ISSN: 2598-3814, ISSN cetak: 1410-4520.

Octania, G. 2021. ‘Peran Pemerintah dalam Rantai Pasok Beras Indonesia’, (32), 44.

P

emerintah Kabupaten Penajam Paser Utara. 2019. ‘Rencana Pembangunan Jangka Menengah Daerah Kabupaten Penajam Paser Utara 2018-2023’. [Daring]. Tersedia pada:

https://penajamkab.go.id/?page_id=2054

Profita, A. dan Rahayu, D. R. 2018. ‘Pengembangan Modeling Pengukuran Kinerja Agri-food Supply Chain Berkelanjutan Berbasis Pengelolaan Risiko’. Journal of Industrial Engineering Management, 3(2).

Rimantho, D., Rosdiana, H. 2017. ‘Penentuan Faktor Kunci Peningkatan Kualitas Air Limbah Industri Makanan Menggunakan Interpretive Structural Modeling (ISM)’. Jurnal Teknik Industri, Vol. 15. ISSN: 1829-8907.

Sanyoto, G. P., Handayani, R. I. dan Widanengsih, E. 2017. ‘Sistem Pendukung Keputusan Pemilihan Laptop Untuk Kebutuhan Operasional dengan Metode AHP (Studi Kasus: Direktorat Pembinaan Kursus Dan Pelatihan Kemdikbud)’, Jurnal Pilar Nusa Mandiri, 13(2), 167–174. Tersedia pada:

http://ejournal.nusamandiri.ac.id/index.php/pilar/article/view/233.

Sari, W. dan Faisal, M. F. 2017. 'Pengaruh Media Penyimpanan Benih Terhadap Viabilitas dan Vigor Benih Padi Pandanwangi'. Jurnal Argoscience, Vol. 7, No. 2, ISSN cetak: 1979-4661, e-ISSN: 2579-7891.

Sutriadi, M. T., Harsanti, E. S., Wahyuni, S., dan Wihardjaka, A. 2019. 'Pestisida Nabati: Prospek Pengendali Hama Ramah Lingkungan'. Jurnal Sumberdaya Lahan, Vol. 13, No. 2, 89-101, ISSN 1907-0799.

Tefa, A. 2017. ‘Uji Viabilitas dan Vigor Benih Padi (Oryza sativa L.) Selama Penyimpanan pada Tingkat Kadar Air yang Berbeda’, Savana Cendana, 2(03), 48–50. doi: 10.32938/sc.v2i03.210.

Umar, R., Fadlil, A. dan Yuminah, Y. 2018. ‘Sistem Pendukung Keputusan dengan Metode AHP untuk Penilaian Kompetensi Soft Skill Karyawan’, Khazanah Informatika: Jurnal Ilmu Komputer dan Informatika, 4(1), p. 27. doi: 10.23917/khif.v4i1.5978.

Yahman, M. B., Widada, D. dan Profita, A. 2020. ‘Analisis Risiko dan Penentuan Strategi Mitigasi pada Proses Produksi Beras’, Matrik, 20(2), 67-78. doi: 10.30587/matrik.v20i2.1112.

Refbacks

  • There are currently no refbacks.